Home » Our Product » Non-Asbestos Heat Shield Gasket Material » HT-50

HT-50


Non-Asbestos Heat Shield/Filler Material

Description

HT-50 is a medium density material with good heat and flame resistance. It Is intended for use as a general purpose insulating filler material in exhaust manifold and heat shield applications and can withstand a maximum temperature of 400°C.






Associated Scientific and Engineering Works
S. No. PROPERTY SPECIFICATIONS TEST METHOD
1. DENSITY   gm/cc 1.05-1.15 ASTM F-1315
2. COMPRESSIBILITY   %
AT 70 kg/cm2 (1000 psi)
15 (max) ASTM F- 36
3. RECOVERY   % 20 (min) ASTM F-36
4. TENSILE STRENGTH   kg/cm2 20 (min) ASTM F-152
5. LOSS ON IGNITION %
AT600°C
18 ASTM F-433
6. MOISTURE CONTENT % 2 (max)
Associated Scientific and Engineering Works

Remarks & Related Data
Specification values determined by test methods required for ASTMF-104, TYPE 3 MATERIALS
Availability
  • Roll Width : 1200mm
  • Roll Weight : 50 - 250 kg
  • Thickness Range : 0.50mm - 1.00mm in rolls
                                      1.20mm - 1.50mm in sheets
  • Sheet Size : 1000mm x 1000mm, 1200mm x 1000mm
Other special sizes available on request.