ASBESTOS JOINTING SHEETS

CJ – 23 EXTRA

Asbestos Gasket Jointing Sheet Without Wire
Made from Chrysotile Asbestos Fiber , Natural Rubber & Butadiene Rubber
To seal off steam, air, water, Natural gas, saline solutions, Alkalies, Amonia & also suitable for oils & fuels & serval other Non-Aggressive media under medium stress conditions.

TECHNICAL SPECIFICATIONS:

The following Information Applies to material Thickness 1.5mm.
MATERIAL TYPE : COMPRESSED ASBESTOS FIBER (CAF)
THICKNESS : 0.25mm, 0.5mm, 0.8mm, 1mm, 1.5mm, 2mm, 3mm, 4mm, 5mm , 6mm (OTHER THICKNESS ON REQUEST)
DIMESNSION OF SHEETS : 1500MM X3100MM, 1500MM X1500MM, 1500MM X 1000MM, 1500MM X 2000MM, 1270MM X1270MM,
1270MM X 3810MM, 3000MM X 3000MM
SURFACE FINISH : Red, Grey , Graphited (OTHER COLORS ON REQUEST)
OPERATING CONDITION : Maximum pressure : 80 Bar
Maximum Temperature: 460°C
SPECIFICATION COMPLIANCE : IS: 2712 / 1998 GRADE W / 2

 

   The following Information Applies to material Thickness 1.5mm.
S.NO. Typical Properties Test Method Unit Specified Value
1 DENSITY IS:2712/1998 G/cm3 2.20
2 TENSILE STRENGTH IS:2712/1998 Mpa >12.8
3 COMPRESSIBILITY IS:2712/1998 % 6 -14
4 RECOVERY IS:2712/1998 % >40
5 IGNITION LOSS IS:2712/1998 % <28
6 STRESS RESISTANCE IS:6210/1979 Mpa >17.5
7 WATER-ABSORPTION
(a) Mass Increase
IS:2712/1998 % <10

All information and recommendations given in this brochure are correct to the best of our knowledge. However, in view of the wide varsity of possible installation and operating conditions one cannot draw the final conclusion in all application cases regarding the behaviour in a gasket joint. Therefore, information can only serve as a guideline.

Need support or have any inquiries?

× Whatsapp Us